Loxeal Threadsealant 58-11 (Gas & Water) 250ml tube
Product Description
- Anaerobic adhesive for the sealing of threaded metal to metal joints
- Rapid cure time - functional in less than 3 hrs
- Seals against gas, water, LPG, hydrocarbons, oils and other chemicals
- High viscosity – won’t run on thread
- Sealing unaffected by shock/vibration with temp. range -50°C to +150°C
- Water Approved (Plumbing Safety Certificate)
- AGA Approval no: 5048
Specifications
| Application |
Kitchen, Laundry, Bathroom |
| For use with |
LPG (Propane), NG, Water |
| Pack Quantity |
1 |
| Pressure Rating (kPa) |
AGA approved to AS 4623:2008 - Class III (2000kPa), Approved by Loxeal s.r.l to 2,600 kPa |
| Working Temp. Range (°C) |
-55 to +150 |
| Retail Packaging |
No |
| No. of Tubes x Size (ml) |
1 x 250ml |
| Composition |
Anaerobic Methacrylate |
| Colour |
Yellow |
| Viscosity (25°C - mPa.5) |
24,000 - 70,000 (high thixotrophy) |
| Density (25°C - gr/ml) |
1.05 |
| Max. Diameter of thread/gap filling |
M 80 / 3° / 0.50mm |
| Flash Point (°C) |
>100 |
| Solvent Content |
None |
| Shelf Life in Years (when stored at 23°C) |
2 |
| Handling Cure Time |
15-30 minutes |
| Functional Cure Time |
1-3 hours |
| Full Cure Time |
3-6 hours |
| Shear Strength |
6-13 N/mm² |
| Locking Torque (breakaway & prevailing) |
6-10 N/mm² & 2-4 N/mm² |
| Elongation at Break |
More than 100% |
| AGA Approval No. |
5048 |
You may also be interested in the following product(s)
